7HBLT

LED Hybrid Battery Lighting Tower

Industry leading Mine Spec LED Hybrid Battery Lighting Tower with world leading Co2 Reduction Technology.

  • Up to 66% Carbon emission reduction
  • Over 60% reduction in running costs
  • Reduced servicing by 75% per annum
Industry leading performance Battery Hybrid
  • Massive Carbon Emission Reduction
  • Silent Running for Full 15 Hours of Light Operation @2100W
  • Engine Running Only to Charge Batteries @ Average of 4hrs Per Day
  • Full Light On – Maximum Light Output No Warm Up
  • No Stabilisation Requirement of Light Output
  • Flexible Light Output Options – From 1800w to 2400w
  • Standard Lights @ 7 x 300W with Impressive 346,500 Lumens
  • Extended Light Operations to Over 420,000 Lumens
  • Reduction of Servicing Costs Over 66%
  • Full Telematics and Customised Web/Cloud Options
  • 50,000 hours of Life Per Light
  • Tried and Tested Tier 4 Kubota Z482 Performance
  • Chassis With Over 100 Million Hours Infield Proven Durability
  • Four pole battery isolation, oil recovery, fuel recovery and engine protection
  • 4 cycles, water-cooled diesel engine

Weight & Dimensions

Transport dimensions(mm) 3025 x 1795 x 2570
Working dimensions(mm) 4385 x 2312 x 8955
Full extending Height(mm) 8955
Wet weight (Gross or ATM Weight) Approx. 2030kg
Dry weight (Tare Weight) Approx. 1925kg

Technical Data

Charging Time 5.5 hrs
Discharging Time 15.5 hrs
Fuel Consumption Approx. 11.29kg per charge
Engine Model Z482-E4B(Kubota)
Speed(rpm) 3000 RPM
Emission class Tier 4 and Stage V

Battery

Type LiFePO4
Total Capacity 840Ah
Rated Voltage 51.2
Communication Mode RS485/ CAN
Cooling Mode Natural heat dissipation(Air cooling)
Operating temperature range( Discharge) -0℃~55℃
Operating temperature range( Charge) -0℃~55℃

Offering significant operational benefits

Higher levels of safety

Reduced fuel consumption

Lower maintenance costs

Increased utilisation rates

STANDARD ISSUE COMPLIANCES

Our towers comply with all requirements

Our manufacturing program follows a continuous improvement and development philosophy, while adopting stringent quality processes to ensure that the Pit Master LED Lighting towers comply with all requirements under the Motor Vehicle Standards Act 1989, OH&S Act 2000, OH&S Regulation 2001 NSW and the Coal Mining Health and Safety Act 1999.

In addition to the comprehensive compliance regime, the substantial Pit Master LED Lighting Tower fleet have undergone rigorous on-the-ground testing, and have over 6.0 million hours of operational time working in some of the harshest environments possible.

Proven reliability, higher levels of safety, reduced fuel burn, lower maintenance costs and increased utilisation levels all contributing to less environmental impact, make Pit Master LED Lighting Towers the No 1 choice around the world.

 

Additional compliances that are included as “Standard issue” on all but the entry towers include:

MDG15 Compliance

Mobile and transportable equipment for use in mines.

AS-4242:1994 Compliance

For use in mines / Electrical wiring systems at extra low voltage.

MDG41 Compliance

Guideline for fluid power system safety at mines December 2010.

1 Compliance

Safety of Machinery 2006.

1202 Compliance

General principles / technical principles clause 3.

Mine Site Compliance

Light vehicles and ancillary equipment

Related Products

Explore other products in this range. With our commitment to quality and customer satisfaction, you’ll find everything you need to enhance your operational experience.