TECH HUB

Troubleshooting Guides

These Troubleshooting Quick Guides have been developed as a general help tool only and may not cover other technical problems or issues that may arise. For immediate assistance please call 1300 SXMINING or +61 7 4842 9800 and ask for Pit Master technical assistance or for less urgent queries, please email: in**@pi*******.au

  1. Home
  2. »
  3. Tech Hub
  4. »
  5. Troubleshooting Guide
Edit Content

Engine quick troubleshooting guide

These Trouble Shooting Quick Guides have been developed as a general help tool only and may not cover other technical problems or issues that may arise. For immediate assistance please call 1300 SXMINING or +61 7 4842 9800 and ask for Pit Master technical assistance or for less urgent queries, please email: in**@pi*******.au ” data-type=”mail”> in**@pi*******.au

Possible Causes
Remedial Action

Fuel is thick and doesn’t flow

Check the fuel tank and fuel filter

Remove water, dirt and other impurities.

As all fuel will be filtered by the filter, if there should be water or other foreign matter on the filter, clean the filter with kerosene.

Air or water mixed in fuel system

If air is in the fuel filter or injection lines, the fuel pump will not work properly.

To attain proper fuel injection pressure, check carefully for loosened fuel line coupling, loose cap nut, etc.

Loosen air vent screws stop fuel filter and injection pump to eliminate all the air in the fuel system.

Edit Content
Click on the Edit Content button to edit/add the content.
Edit Content
Click on the Edit Content button to edit/add the content.
Edit Content
Click on the Edit Content button to edit/add the content.